This article the authors make based on the experience when asked a friend to re-install the Netbook, you know it if it does not include some of the Netbook ext. DVD Drive. So confused, how to install Windows it what to do? Since there is only the USB plug, it just made Windows 7 using FlashDisk Installer.
This method can also be used if the DVD drive built-laptop / notebook / PC has suffered a setback age / Optic is a weak read / damaged.
This method can also be used if the DVD drive built-laptop / notebook / PC has suffered a setback age / Optic is a weak read / damaged.
That need to be prepared:
1. FlashDisk minimum of 4GB
2. WinToFlash program, download here
3. DVD Installer Windows 7
4. Make sure Netbook / Laptop / PC can target booting via USB
1. FlashDisk minimum of 4GB
2. WinToFlash program, download here
3. DVD Installer Windows 7
4. Make sure Netbook / Laptop / PC can target booting via USB
OK, if all conditions are met, we proceed directly
1. Plug in your flash
2. Open the program WinToFlash
3. If you do not like fond of the English language, click "Language" at the bottom right corner
4. Click the tab "Advanced mode", then select Task was to "Transfer Windows Vista/2008/7 setup to USB Drive", then click the RUN button
1. Plug in your flash
2. Open the program WinToFlash
3. If you do not like fond of the English language, click "Language" at the bottom right corner
4. Click the tab "Advanced mode", then select Task was to "Transfer Windows Vista/2008/7 setup to USB Drive", then click the RUN button
5. It will open basic parameters
6. Insert your Windows 7 installer DVD on DVD-DRIVE
Fill out the "Vista setup file path" with the path your DVD-DRIVE
Fill out the "USB Drive" with the path to your USB stick
Give check the "Remove the read-only attribute from files"
7. Click the tab "Process Step", make sure all options are checked, there
8. Click the Format tab, make sure the parameters - the following parameters
USB Drive Type: "Flash stick or card"
Format Type: "USB-HDD"
File System: FAT32 LBA
Give a check in the "Select This parameter Automatically"
6. Insert your Windows 7 installer DVD on DVD-DRIVE
Fill out the "Vista setup file path" with the path your DVD-DRIVE
Fill out the "USB Drive" with the path to your USB stick
Give check the "Remove the read-only attribute from files"
7. Click the tab "Process Step", make sure all options are checked, there
8. Click the Format tab, make sure the parameters - the following parameters
USB Drive Type: "Flash stick or card"
Format Type: "USB-HDD"
File System: FAT32 LBA
Give a check in the "Select This parameter Automatically"
9. Click the tab FAT, make sure the "Select This parameter Automatically" is checked
10. If you're ready all, click Run, it will display the "Windows Licences Agreement", select "I Accepted .....", click Continue
11. If a warning appears, as pictured below, right click on OK
12. Wait until the process is complete
13. If you are finished you can try your FlashDisk on target.
CAUTION: Before the author wrote this article, this article has many in another web, so I'll just try rewriting the style of the author's own language, so not a copy paste from.
Source: xcode.or.id
10. If you're ready all, click Run, it will display the "Windows Licences Agreement", select "I Accepted .....", click Continue
11. If a warning appears, as pictured below, right click on OK
12. Wait until the process is complete
13. If you are finished you can try your FlashDisk on target.
CAUTION: Before the author wrote this article, this article has many in another web, so I'll just try rewriting the style of the author's own language, so not a copy paste from.
Source: xcode.or.id
No comments:
Post a Comment