Continuing from the previous article about the review of the Dell Vostro A100 Desktop PC, we try to present some interesting tips that you can use to maximize the performance of the Dell Vostro A100 with Ubuntu Linux 8.04 (Hardy Heron).
First, we try to share step by step how to connect the Dell Vostro with other computers via a network. This article we present given the current computer network is a basic requirement of a work activity, especially when using it in the office.
Preparation first thing you should do, you have to prepare a cable network that has been fitted with an RJ45 connector. If you find difficulty, contact your local network administrator to get the specs on the network conditions along the length of cable you have to prepare or Occasionally you can order the cable and RJ45 connectors on the nearest computer store.
Assuming you already have a network cable with RJ45 connectors that are ready to use, follow these steps to connect the Dell Vostro A100 with other devices.
- Connect the cable / RJ45 connector on the network port on the Dell Vostro A100 there.
- Attach the other end with a Switch / Hub / other computers.
- Turn on your PC Desktop (you can also connect a network cable after the computer is on).
- Click System, Administration, Network.
- lick the Connections tab and select the network device to be used (in this case select eth0), and then click Properties.
- if the network administrator assign an IP sddress to you, select the Static IP address on the Configurations, then enter the IP address, Subnet mask and Gateway in accordance with the given. If not, select Automatic configuration (DHCP) in Configurations.
- Click OK and click OK again on the Network.
Special Thank to : http://blog.fastncheap.com/setting-jaringan-pada-ubuntu-linux-8-04-di-dell-vostro-a100/
No comments:
Post a Comment